Steel Hinge set for fence gates
Additional Details:
- Zinc Plated Steel
- Powder Coated Finish
- Self-closing hinge technology, designed to help with sagging gates
- Hinges Sold in Pairs (2 Hinges)
- Self-drilling screws included (drills through metal, wood or vinyl)
- Hinges will open to approximately 180 degrees
Steps for hinge installation:
- Place horizontal adjustment on gate only
- Screw hinges onto gate – hinge side with the two nuts (best to pre-drill holes for the screws)
- Screw hinges onto post – spring loaded side of the hinge (best to pre-drill holes for the screws)
- Horizontal adjustment – use wrench to adjust nuts for proper horizontal position
- Fully tighten both nuts
- Insert adjusting pin and rotate towards gate until the desired amount of tension is achieved
- Insert locking pin
- Rotate adjusting pin towards post until the locking pin is against the hinge and remove the adjusting pin
Note: If desired you can take out the locking pin to make the hinges so they are not self-closing.
